dcsimg

Power Tools for Professionals

MRC23EVSK

BoschMRC23EVSKwalkaround(2).png
Bosch_Router_Combo_Kit_MRC23EVSK_MRF23EVS_MRP23EVS_(EN)(2).jpg
MRC23EVSComboKit_35_400x300.jpg
Bosch_Router_Combo_Kit_MRC23EVSK_(EN)(2).jpg
Bosch_Router_Combo_Kit_MRC23EVSK_MRF23EVS_(EN)(13).jpg
Bosch_Router_Combo_Kit_MRC23EVSK_MRF23EVS_(EN)(9).jpg
Bosch_Router_Combo_Kit_MRC23EVSK_MRF23EVS_(EN)(7).jpg
MRF23EVS_Back_35_400x300.jpg
MRF23EVS_Handle_35_400x300.jpg
Bosch_Router_Combo_Kit_MRC23EVSK_MRF23EVS_(EN)(2).jpg
MRF23EVS_Hero(5).png
Bosch_Router_Combo_Kit_MRC23EVSK_MRP23EVS_(EN)(12).jpg
Bosch_Router_Combo_Kit_MRC23EVSK_MRP23EVS_(EN)(10).jpg
Bosch_Router_Combo_Kit_MRC23EVSK_MRP23EVS_(EN)(8).jpg
Bosch_Router_Combo_Kit_MRC23EVSK_MRP23EVS_(EN)(6).jpg
Bosch_Router_Combo_Kit_MRC23EVSK_MRP23EVS_(EN)(4).jpg
Bosch_Router_Combo_Kit_MRC23EVSK_MRP23EVS_(EN)(2).jpg
MRF23EVS_Hero(2).png
MRC23EVS_application_35_400x300(2).jpg
MRC23EVSComboKit(2).png
2.3 HP Electronic Modular Router System

The Bosch MRC23EVSK 2.3 HP Electronic Modular Router System is an advanced set-up that provides a fixed base and a plunge base for the MR23EVS router. This system allows for outstanding operator control, with the trigger-control system that has a power switch in both the plunge-base's and the fixed-base's handle. The plunge base's Afterlock microfine bit-depth adjustment at any plunge setting allows for precision, with an adjustable turret stop makes it easy to set any cumulative depth. With a smooth plunge action and a spring-lock plunge lever, this router gets accurate results. The fixed base has microfine bit-depth adjustment, with a continuous depth range of 1-5/8 in., allowing for accurate and fast changes, while its precision-centering design allows the bit to be centered with the sub-base or optional template guides. The router has a 15 Amp motor and adjustable speed settings. The variable-speed dial allows the operator to match the speed to the material. Constant Response circuitry delivers a constant speed throughout the cut. Users can glide along the intended cutline using dovetail fixtures, templates, jigs and other guidance devices.

Read more Show less

Includes

  • Motor
  • Fixed Base (MRF01)
  • Plunge base (MRP01)
  • 1/4" Self-Releasing Collet Chuck - 2 610 906 283
  • 1/2" Self-Releasing Collet Chuck - 2 610 906 284
  • 16mm Shaft Wrench - 2 610 991 388
  • 24mm Collet Nut Wrench - 2 610 992 417
  • T-Handle Hex Height Adjustment Wrench - 2610923193
  • Carrying Case - 2 610 004 484
  • Pack of 3 M4 Screws for table mounting - 2610005966

Benefits

  • Trigger-control system – trigger power switch located in handle for enhanced control
  • Powerful 15 Amp motor – produces 10,000 to 25,000 RPM and 2.3 hp
  • Precision-centering design – makes it easy to keep bit on cutline
  • Afterlock plunge-base depth adjustment – easy, precise adjustments at any plunge setting
  • Versatile fixed-base depth adjustment – features 1-5/8 In. continuous microfine adjustment range
  • Above-table depth adjustment when fixed base is installed in router table
  • Constant Response circuitry – maintains constant speed under load
  • Soft-start function – reduces start-up torque
  • Always-on LED lighting – for enhanced visibility in bit area
  • Two-stage quick clamp system – for fast tool-free conversion
  • Variable speed dial – for matching speed to workpiece and task
  • Contoured soft grip handles – for enhanced control and comfort
  • Fixed base has threaded holes for mounting to router table positioned in common three-hole pattern
  • Cord swivel – for added mobility
  • Rugged carrying case has compartments for all included items
  • Compatible with optional RA1129 Template Guide Adapter Set – for easy change of Bosch quick-release template guides and common threaded template guides

Technical Data

Specifications
Amperage 15.0
Base Diameter 6" Fixed/ 7" Plunge
Case Type Hard plastic
Collet Capacity 1/4", 3/8", 1/2", 8 mm
Dust Collection No
Fixed-Base Depth Range 1-5/8"
Height 9.5"
Length 6.75"
No Load RPM 10,000-25,000
Plunge Depth 3" (75mm)
Rating 120V AC
Subbase Opening 2"
Voltage 120V
Weight 12.6lb
Width 12.6"
Works With Router Tables
RA1171 Cabinet-Style Router Table, RA1181 Router Table, RA1152 Offset Bit-Change Wrench Set
Router Guide
RA1054
Template Guide System
RA1128 Template Guide Set, RA1129 Template Guide Adapter Set
Centering Device for Subbases and Attached Template Guides
RA1051
Dust Collection Attachments
RA1175 Edge-forming Dust Hood, RA1177AT Three-Hood Dust Hood Set
Includes Motor, Fixed Base (MRF01), Plunge base (MRP01), 1/4" Self-Releasing Collet Chuck - 2 610 906 283, 1/2" Self-Releasing Collet Chuck - 2 610 906 284, 16mm Shaft Wrench - 2 610 991 388, 24mm Collet Nut Wrench - 2 610 992 417, T-Handle Hex Height Adjustment Wrench - 2610923193, Carrying Case - 2 610 004 484, Pack of 3 M4 Screws for table mounting - 2610005966
Read more Show less

Owner's Manual

MRC23EVSK

Accessories For MRC23EVSK

Arbors for Slotting Cutters
Bearing Enlarger Set
Bearing Enlargers
Bowl- and Sink-Trim Bits
Carbide-Tipped A-Line Edge Aligning Bits
Carbide-Tipped Beading Bits
Carbide-Tipped Beading Stile and Rail Bits
Carbide-Tipped Bevel-Bowl Bit
Carbide-Tipped Bullnose Bits
Carbide-Tipped Chair Mat Edge Bit
Carbide-Tipped Chamfer Bits
Carbide-Tipped Classical Bits
Carbide-Tipped Classical Groove Bits
Carbide-Tipped Convex Edging Bit
Carbide-Tipped Core Box Bits
Carbide-Tipped Cove Bits
Carbide-Tipped Cove Raised Panel Bit
Carbide-Tipped Cove Vertical Panel-Raiser Bit
Carbide-Tipped Cove and Bead Bits
Carbide-Tipped Dish Carving Bit
Carbide-Tipped Doorlip Bit
Carbide-Tipped Double-Flute Flush and Bevel Laminate Trim Assemblies
Carbide-Tipped Double-Flute Flush and Bevel Laminate Trim Bits
Carbide-Tipped Double-Flute Straight Bits
Carbide-Tipped Double-Flute Templet Trim Bit
Carbide-Tipped Dovetail Bits
Carbide-Tipped Drawer Lock Joint Bit
Carbide-Tipped Edge Beading Bits
Carbide-Tipped Extended Round Nose Bits
Carbide-Tipped Finger Pull Bit
Carbide-Tipped Flush Trim V-Groove Bits
Carbide-Tipped Four-Flute Flush and Bevel Laminate Trim Assemblies
Carbide-Tipped Helical Laminate Trim Bit
Carbide-Tipped Hinge Mortising Bits
Carbide-Tipped Lock Miter Bit
Carbide-Tipped Lock Mortising Bits
Carbide-Tipped Multi-Bead / Reed Bit
Carbide-Tipped Multi-Form Bit
Carbide-Tipped No-Drip Edge Bit
Carbide-Tipped Ogee Bits with Fillet
Carbide-Tipped Ogee Raised Panel Bits
Carbide-Tipped Ogee Stile and Rail Bits
Carbide-Tipped Ogee Vertical Raised Panel Bit
Carbide-Tipped Ogee and Bead Bit
Carbide-Tipped Overhang Cutoff Bits
Carbide-Tipped Plunge Roundover Bits
Carbide-Tipped Plywood Mortising Bits
Carbide-Tipped Rabbeting Bits
Carbide-Tipped Raised-Panel Groove Bit
Carbide-Tipped Reverse Curve Ogee and Bead Bit
Carbide-Tipped Reversible Glue-Joint Bit
Carbide-Tipped Roman Ogee Bits
Carbide-Tipped Roundover Bits
Carbide-Tipped Single-Flute Straight Bits
Carbide-Tipped Stair Routing Bit
Carbide-Tipped Table Edge Bit
Carbide-Tipped Tongue and Groove Bits
Carbide-Tipped Top Bearing Dado Clean Out Bit
Carbide-Tipped Top Bearing Straight Trim Bits
Carbide-Tipped Traditional Raised Panel Bits
Carbide-Tipped Traditional Vertical Raised Panel Bit
Carbide-Tipped Triple-Flute Flush Laminate Trim Bits
Carbide-Tipped Triple-Flute Flush and Bevel Laminate Trim Assemblies
Carbide-Tipped Triple-Flute Templet Trim Bit
Carbide-Tipped Under Round Bits
Carbide-Tipped V-Groove Bits
Carbide-Tipped Wavy Edge Bits
Carbide-Tipped Wedge Groove Bit
Carbide-Tipped Wedge Tongue Bit
Combination-Flush and Bevel-Trim Bits
High-Speed Steel Double-Flute Straight Bits
High-Speed Steel Single-Flute Straight Bits
Keyhole Router Bits
Non-Marring Bearing Set
Non-Marring Bearings
Pilot Panel Down Spiral Bits
Single Flute Pilot Panel Bits with Drill-Through Point
Solid Carbide Bevel-Trim Bits
Solid Carbide Double-Flute Acrylic Bit
Solid Carbide Double-Flute Chipbreaker Spiral Bits
Solid Carbide Double-Flute Compression Spiral Bit
Solid Carbide Double-Flute Downcut Spiral Bits
Solid Carbide Double-Flute O-Flute Bits
Solid Carbide Double-Flute Straight Bits
Solid Carbide Double-Flute Straight Bits
Solid Carbide Double-Flute Upcut Spiral Bits
Solid Carbide Fiberglass Bit/Burr Bit
Solid Carbide Flush-Trim Bits
Solid Carbide Hole and Flush Trim Bit
Solid Carbide Rip and Slotter Bit
Solid Carbide Single-Flute Compression Spiral Bit
Solid Carbide Single-Flute O-Flute Bits
Solid Carbide Single-Flute Straight Bits
Solid Carbide Triple-Flute Downcut Spiral Bit
Solid Carbide Triple-Flute Upcut Spiral Bit
Solid Carbide V-Groove Bit
Solid Carbide Veining Bits
Staggertooth Pilot Panel Bit
Staggertooth Router Bits
Three-Wing Slotting Cutters
Two Flutes Pilot Panel Bits with Drill-Through Point
Two-Wing Slotting Cutter

Support

Customer Support

Have a tool, accessory, application or service question?
Call us at 1-877-BOSCH99 (1-877-267-2499) or visit the Frequently Asked Questions.

Search for Parts Diagram

Locate and download the parts diagram for your tool.

Product Registration

Protecting your investment in Bosch power tools can save you time and money in the future.

Order Spare Parts

Order your genuine Bosch parts here.

Contact Us

Call our Service Hotline or use our contact form.

1-877-BOSCH99 (1-877-267-2499)

Mon-Fri: 7:00-19:00 CST

FAQ

Visit the Frequently Asked Questions section.
We may already have the answer for your questions.

Show FAQ
TEXT Customer Service

Have a service related question? Text us here.

Mon-Fri: 7:00-19:00 CST