Contact Us
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)Mon-Fri: 7:00-19:00 CST
7 pc. SDS-plus® Bulldog™ Anchor Drive Installation Kit
.png)
.png)
.png)
.png)
.png)
.png)
Hover Image to Zoom
Hover Image to Zoom
HC2309
- Bulldog™ SDS-plus® bit has carbide tip for durable bit life
- Used to set masonry screws with hex sleeve drive tools
- Upgraded flute pulls dust from hole for 15% faster drilling
Benefits
Fast-drilling Bulldog™ SDS-plus® bit design
with a carbide tip, brazing process and centric tip for rapid rotary concrete drilling
Bosch-made carbide tip
deliver outstanding durability under heavy loads
Premium manufacturing
made with premium materials and innovative engineering
Upgraded flute design
aggressively pulls dust away from hole, for faster and cooler drilling
Centric conical tip
ideal for drilling anchoring holes, the centering tip provides precise starts
Hex drive on bit fits into driver sleeve
features a 1/4 In. hex shoulder for a drive sleeve used to set masonry screws
Optimized for heavy-duty and cordless SDS-plus® rotary hammers
Technical Data
| *Note | Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM |
| Description | 7 pc anchor drive installation kit: 5/32" x 6-1/2" and 3/16" x 6-1/2" hex bits, #2 and #3 Phillips® power bits, 5-3/4" sleeve, 1/4" and 5/16" sockets |
| Flute Length | 5.0 |
| Length | 7.0" |
| Shank Diameter | 0.0 |
| Includes | Hex Drill Bits: (1) 5/32", (1) 3/16"; Phillips® Insert Bits: (1) #2, (1) #3; (1) 5-3/4" Sleeve, Sockets: (1) 1/4", (1) 5/16" |
HC2309
Includes
Hex Drill Bits: (1) 5/32", (1) 3/16"; Phillips® Insert Bits: (1) #2, (1) #3; (1) 5-3/4" Sleeve, Sockets: (1) 1/4", (1) 5/16"
HC2309
Includes
Hex Drill Bits: (1) 5/32", (1) 3/16"; Phillips® Insert Bits: (1) #2, (1) #3; (1) 5-3/4" Sleeve, Sockets: (1) 1/4", (1) 5/16"
AD2300
Includes
-
Other sizes
AD2300
Description
Anchor drive sleeve used to set masonry screws and concrete anchors. Accepts 5/32", 3/16" and 1/4" bits
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM