Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)Mon-Fri: 7:00-19:00 CST
3/8 In. x 1/2 In. Carbide Tipped 2-Flute Flush Trim Bit
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Double flute trim bit allows for a smoother finish. The fully hardened and tempered steel shank provides ultimate durability.
Specification | |
---|---|
A. Overall Diameter | 3/8" |
Angle | Flush |
B. Cutting Edge Length | 1/2" |
Bulk | false |
C. Shank Diameter | 1/4" |
D. Overall Length | 2-1/8" |
Description | 3/8" x 1-13/16" Carbide-tipped 2-Flute Flush and Bevel Laminate Trim Bit |
E. Bearing Diameter | 3/8" |
Flute Length | 0.5 |
Number of Flutes | 2.0 |
Overall Length | 2.125 |
Type of Cut | Flush |
A. Overall Diameter
3/8"
B. Cutting Edge Length
1/2"
C. Shank Diameter
1/4"
D. Overall Length
2"
A. Overall Diameter
3/8"
B. Cutting Edge Length
1"
C. Shank Diameter
1/4"
D. Overall Length
2"
A. Overall Diameter
1/2"
B. Cutting Edge Length
1"
C. Shank Diameter
1/4"
D. Overall Length
2"
A. Overall Diameter
3/8"
B. Cutting Edge Length
1/2"
C. Shank Diameter
1/4"
D. Overall Length
2-1/8"
A. Overall Diameter
1/2"
B. Cutting Edge Length
1"
C. Shank Diameter
1/4"
D. Overall Length
2-1/2"
A. Overall Diameter
1/4"
B. Cutting Edge Length
1"
C. Shank Diameter
1/4"
D. Overall Length
2-9/16"
Type of Cut
Flush
A. Overall Diameter
11/16"
B. Cutting Edge Length
3/8"
C. Shank Diameter
1/4"
D. Overall Length
2-5/64"
Type of Cut
Flush or 22° bevel
A. Overall Diameter
1/2"
B. Cutting Edge Length
5/16"
C. Shank Diameter
1/4"
D. Overall Length
2"
Type of Cut
25˚ bevel
A. Overall Diameter
11/16"
B. Cutting Edge Length
3/8"
C. Shank Diameter
1/4"
D. Overall Length
2-1/8"
Type of Cut
22° bevel
A. Overall Diameter
1/2"
B. Cutting Edge Length
1"
C. Shank Diameter
1/2"
D. Overall Length
3-1/4"
Type of Cut
Flush
A. Overall Diameter
1/2"
B. Cutting Edge Length
2"
C. Shank Diameter
1/2"
D. Overall Length
4-3/8"
Type of Cut
Flush
A. Overall Diameter
1/2"
B. Cutting Edge Length
1"
C. Shank Diameter
1/4"
D. Overall Length
2-1/2"
Type of Cut
Flush
A. Overall Diameter
1/2"
B. Cutting Edge Length
5/8"
C. Shank Diameter
1/4"
D. Overall Length
2-1/4"
Type of Cut
Flush
A. Overall Diameter
3/8"
B. Cutting Edge Length
1"
C. Shank Diameter
1/4"
D. Overall Length
2-5/8"
Type of Cut
Flush