Router Attachments, Palm Routers

2609110438
  • Comfortable drop-forged design
  • Thin profile for use on PR004 offset base collet, as well as PR10E and PR20EVS collets
Learn more

 
2609110786
  • Comfortable drop-forged design
  • Thin profile for use on PR10E and PR20EVS armature shafts
Learn more

 
2610008122
  • Self-Releasing Design
Learn more

 
2610008124
  • For use with PR001 Palm Router Fixed Base
  • Now made of clear polycarbonate
  • Motor and fixed base shown in photo above are NOT included
Learn more

 
2610021520
  • For use with PR011 Palm Router Plunge Base
  • Made of clear polycarbonate material
  • Motor and plunge base shown in photo above are NOT included
Learn more

 
PR001
Fixed Base for PR10E and PR20EVS Palm Routers
  • For use with Bosch PR10E and PR20EVS Colt Palm Router Motors
  • Quick-Clamp System — Allows motor to be easily adjusted or moved from base to base
  • Enhanced Bit Capacity — Fixed Base accepts bits up to 1-5/16" in diameter
Learn more

 
PR002
Palm Router Stragiht Edge Guide
  • For use with Bosch PR011 Colt Palm Router Fixed Base
  • Guides router along edges of workpiece
  • Will also guide bit up to 3-5/8 In. in from the edge of workpiece
Learn more

 
PR003
Palm Router Roller Guide
  • Guides router when non-bearing bit or unpiloted bit is used
  • For use with Bosch models PR10E and PR20EVS
  • Adjustable vertically and horizontally
Learn more

 
PR004
Palm Router Offset Base with Roller Guide
  • For use with Bosch PR10E and PR20EVS Colt Palm Routers
  • The offset base's belt-driven offset spindle allows routing near vertical surfaces, such as when trimming laminate applied to top of installed countertop backsplash
  • The quick-clamp system allows the motor to be easily moved from base to base
Learn more

 
PR005
Palm Router Tilt Base
  • For use with Bosch PR10E and PR20EVS Colt Palm Router Motors
  • This tilt base has detents at key angles and allows routing in hard-to-reach areas, such as edge of countertop laminate near backsplash and also routing at special angles
  • The tilt angle adjustment range is 70°, from -30° to 45°
Learn more

 
PR007
Side-Handle Subbase with Dust Extraction Port
  • For use with Bosch PR001 fixed base of PR10E and PR20EVS colt palm routers
  • Side handle provides additional gripping location for support of router
  • Allows dust collection when edge-forming or when working in from workpiece edge
Learn more

 
PR008
Base Cover for PR001 Fixed Base for PR10E and PR20EVS Palm Routers
  • This plastic cover fits on the Bosch PR001 fixed base for PR10E and PR20EVS palm routers
  • Provides a layer of insulation from heat, which can be generated by palm routers that are used in production shops and other applications that involved constant or heavy applications
  • Made of plastic
Learn more

 
PR009
Round Subbase for Use with PR001 Fixed Base for PR10E and PR20EVS Palm Router Together with RA-series Templet Guides
  • For use with Bosch PR001 fixed base for PR10E and PR20EVS colt palm routers
  • Accepts Bosch RA-series Templet guides (not included)
  • Precision centering design makes it easy to follow intended cut line when using jigs, templets, dovetail fixtures and similar guidance devices
Learn more

 
PR010
Large Round Subbase for Palm Routers (Accepts Threaded Templet Guides)
  • For use with the PR011 fixed base of PR10E and PR20EVS Colt palm routers
  • Accepts common threaded templet guides (not included)
  • The precision centering design allows accurate positioning of bit within the subbase and Templet guides (not included)
Learn more

 
PR011
Plunge Base for PR20EVS and PR10E Colt™ Palm Router Motor
  • Compatible with Bosch PR20EVS and PR10E Colt™ palm router motors
  • Smooth plunge action
  • The plunge lock release lever is conveniently located to allow maximum control, springs to locked position for use of use
Learn more

 
PR012
Dust Hood for PR011 Palm Router Plunge Base
  • For use with PR011 palm router plunge base
  • Makes it much easier to keep work area clean
  • Attaches with hose port facing front or back of base
Learn more

 
RA1054
Deluxe Router Guide
  • Precision fine adjustment control
  • Guides cut along the workpiece or up to 8" in from edge
  • Easily converts into circle guide for making arcs and circles up to 32" in diameter
Learn more

 
RA1105
Quick-Change Router Templet Guides
  • 7/16 In. outer diameter
  • 3/8 In. inner diameter
  • Approximately 9/64 In. protrusion below subbase
Learn more

 
RA1107
Quick-Change Router Templet Guides
  • 7/16 In. outer diameter
  • 3/8 In. inner diameter
  • Approximately 5/16 In. protrusion below subbase
Learn more

 
RA1109
7/16 In. x 1/2 In. x 13/32 In. General Application Template Guide
  • Outer diameter = 1/2 In.
  • Inner diameter= 13/32 In.
  • Protrusion below Subbase = approximately 7/16 In.
Learn more

 
RA1111
Quick-Change Router Templet Guides
  • 5/8 In. outer diameter
  • 17/32 In. inner diameter
  • Approximately 3/16 In. protrusion below subbase
Learn more

 
RA1113
1/2 In. x 5/8 In. x 17/32 In. Radius Hinge Template Guide
  • Outer Diameter = 5/8"
  • Inner Diameter = 17/32"
  • Protrusion Below Subbase = Approximately 1/2"
Learn more

 
RA1115
3/16 In. x 3/4 In. x 21/32 In. General Application Template Guide
  • Outer Diameter = 3/4"
  • Inner Diameter = 21/32"
  • Protrusion Below Subbase = Approximately 3/16"
Learn more

 
RA1117
31/64 In. x 13/16 In. x 5/8 In. General Application Template Guide
  • Outer diameter = 13/16 In.
  • Inner diameter = 5/8 In.
  • Protrusion below Subbase = approximately 31/64 In.
Learn more

 
RA1121
Quick-Change Router Templet Guides
  • 1-3/8 In. outer diameter
  • 1-19/64 In. inner diameter
  • Approximately 7/16 In. protrusion below subbase
Learn more

 
RA1126
Quick-Change Router Templet Guide Adapter
  • Required for mounting RA-series Templet guides to Bosch routers
  • Lever action for fast and easy guide changes
  • Sold individually
Learn more

 
RA1151
Centering Pin and Cone
  • For use with Bosch RA1161, RA1162, RA1166, 1617 series, 1618 series, 1619EVS, MRF01, MRP01, MRC23EVSK, MRP23EVS, MRF23EVS, PR011, PR009, PR010
  • For precision centering of router sub bases or templet guides
  • Works with a 1/4 In. or 1/2 In. collet
Learn more