Service Hotline
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)
Mon-Fri: 7:00-19:00 CST
2-9/16 In. SDS-plus® SPEEDCORE™ Thin-wall Core Bit
.png)
.png)
.png)
.png)
.png)
.png)
Hover Image to Zoom
Hover Image to Zoom
T3915SC
High-grade tungsten carbide offers durability and life. Ejector hole delivers easy core removal of masonry, brick and block. Works with Bosch one-piece SDS-plus® pilot bits and extensions.
Benefits
High-grade tungsten carbide teeth
Works with Bosch SPEEDCORE™ SDS-plus® pilot bits and extensions
Pilot bit is integrated with mandrel
Designed for drilling with smaller hammers
Ejector hole
Technical Data
| *Note | Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM |
| Diameter inch | 2-9/16" |
| Length in | 3.0" |
| Pack Quantity | 1 |
| Useable Length in | 2" |
T3915SC
T3915SC
T3910SC
T3911SC
T3912SC
T3913SC
T3914SC
T3916SC
T3917SC
T3918SC
T3919SC
T3920SC
T3921SC
Other sizes
T3921SC
Diameter inch
4-3/8"
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
T3918SC
Diameter inch
3-3/16"
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
T3919SC
Diameter inch
3-1/2"
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
T3920SC
Diameter inch
3-7/8"
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
T3911SC
Diameter inch
1-3/16"
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
T3912SC
Diameter inch
1-3/8"
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
T3913SC
Diameter inch
1-9/16"
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
T3914SC
Diameter inch
1-7/8"
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
T3916SC
Diameter inch
2-11/16"
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
T3917SC
Diameter inch
3-1/8"
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
T3910SC
Diameter inch
1"
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM