Service Hotline
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)
Mon-Fri: 7:00-19:00 CST
1/2 In. x 1 In. Carbide Tipped Flush Trim V-Groove Bit
.png)
.png)
Hover Image to Zoom
Hover Image to Zoom
85646M
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim v-groove bit trims the edges of face frames flush with cabinet sides, while at the same time, cuts a decorative 'V' groove to conceal the seam between the frame and the case. The fully hardened and tempered steel shank provides ultimate durability.
Benefits
Bit is used to flush face frame to cabinet side while at same time cutting a v-groove down cabinet joint
Compact ball-bearing pilot guides bit along edge of material
Bit can also be used to create a decorative v-groove cut
Micrograin carbide tips provide superior wear resistance and long life
Technical Data
| B. Cutting Edge Length | 1" |
| Bearing Diameter | 1/2" |
| C. Shank Diameter | 1/4" |
| D. Overall Length | 2-1/2" |
| Description | 1/2 In. x 1 In. Carbide Tipped Flush Trim V-Groove Bit |
| E. Angle | 90° |
| Flute Length in | 1.0 |
| Number of Flutes | 1.0 |
| Overall Diameter in | 5/8" |
| Overall Length in | 2.5 |
| Pack Quantity | 1 |
85646M
85646M
85647M
Other sizes
85647M
Overall Diameter in
5/8"
B. Cutting Edge Length
1"
C. Shank Diameter
1/2"
D. Overall Length
3"
E. Angle
90°