Contact Us
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)Mon-Fri: 7:00-19:00 CST
1/8 In. to 1/2 In. Titanium Nitride Coated Step Drill Bit
.png)
.png)
.png)
.png)
.png)
.png)
Hover Image to Zoom
Hover Image to Zoom
SDT1
The Bosch line of step drills offers the ability to drill up to 13 different size holes with a single bit. Step drill bits are ideal for electrical, plumbing and HVAC contractors. Titamium-coated step drill bits remain clean and accurate even in the toughest materials; superior durability that lasts up to six times longer life than high-speed steel.
Benefits
Super-hard titanium-coating lasts up to six times longer than high-speed steel
Titanium-coating reduces heat for longer life
Self-starting point starts on contact
Drills clean, accurate holes in these thin materials (up to 1/8 In.): sheet metal, ducts, steel, copper, brass, aluminum, plastic, plexiglass, wood, veneers, vinyl siding, plasterboard, PVC, stainless steel and cast iron
Balanced double flute eliminates chatter and vibration
Technical Data
| *Note | Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM |
| Application | All common drilling needs |
| Diameter inch | 1/8" to 1/2" |
| Flute Length in | 2.0 |
| Length in | 3.0" |
| Number of Hole Sizes | 13.0 |
| Pack Quantity | 1 |
| Shank Diameter in | 0.25 |
| Step Depth | 1/8" |
| Step Height in | 1/32" |
SDT1
SDT1
SDT10
SDT12
SDT2
SDT3
SDT4
SDT5
SDT6
SDT7
SDT8
SDT9
Other sizes
SDT10
Diameter inch
1/4" to 1-3/8"
Step Height in
1/8"
Step Depth
1/8"
Number of Hole Sizes
10
Shank Diameter in
0.375
SDT12
Diameter inch
3/8"
Step Height in
N/A
Step Depth
N/A
Shank Diameter in
0.25
SDT2
Diameter inch
3/16" to 7/8"
Step Height in
1/16"
Step Depth
1/8"
Number of Hole Sizes
12
Shank Diameter in
0.375
SDT3
Diameter inch
1/4" to 3/4"
Step Height in
1/16"
Step Depth
1/8"
Number of Hole Sizes
9
Shank Diameter in
0.375
SDT4
Diameter inch
1/4", 7/8", 1-1/8"
Step Height in
1-1/8"
Step Depth
5/32"
Number of Hole Sizes
3
Shank Diameter in
0.375
SDT5
Diameter inch
7/8"
Step Height in
N/A
Step Depth
N/A
Number of Hole Sizes
1
Shank Diameter in
0.375
SDT6
Diameter inch
3/16" to 1/2"
Step Height in
1/16"
Step Depth
3/8"
Number of Hole Sizes
6
Shank Diameter in
0.25
SDT7
Diameter inch
9/16" to 1"
Step Height in
1/16"
Step Depth
1/8"
Number of Hole Sizes
8
Shank Diameter in
0.375
SDT8
Diameter inch
1/2"
Step Height in
N/A
Step Depth
N/A
Number of Hole Sizes
1
Shank Diameter in
0.25
SDT9
Diameter inch
13/16" to 1-3/8"
Step Height in
1/16"
Step Depth
1/8"
Number of Hole Sizes
10
Shank Diameter in
0.5