Contact Us
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)Mon-Fri: 7:00-19:00 CST
5/8 In. Titanium-Coated Countersink
.png)
.png)
.png)
.png)
.png)
.png)
Hover Image to Zoom
Hover Image to Zoom
CST2
The Bosch line of countersinks are great for deburring and chamfering openings to pre-drilled holes. Great for electrical, plumbing and HVAC contractors. Bosch countersinks cut varied materials cleanly and accurately. With standard high-speed steel and super hard titanium-coated bits, these countersinks perform great in even the toughest materials.
Benefits
Self-starting point starts on contact
Trailing flute automatically deburrs holes
Balanced double flute
Resharpenable cutting edge enables longer tool life
Eliminates chatter and vibration
Technical Data
| *Note | Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM |
| Chamfer Angle | 82° |
| Diameter inch | 5/8" |
| Length in | 1.75" |
| Number of Flutes | 5.0 |
| Pack Quantity | 1 |
| Shank Diameter in | 0.25 |
CST2
CST2
CST1
CST3
Other sizes
CST3
Diameter inch
3/4"
Chamfer Angle
82°
Shank Diameter in
0.25
Number of Flutes
5
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
CST1
Diameter inch
1/2"
Chamfer Angle
82°
Shank Diameter in
0.25
Number of Flutes
5
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM