| Item | Type | Teeth Per Inch | Overall Length | Quantity | Type of Cut | |
|---|---|---|---|---|---|---|
| T101A3 | Special for Plexiglas | 14 Teeth Per Inch | 4 | 3 | Fine and straight cuts | |
| T113A3 | Special for Soft Materials | Knife Edge for Soft Materials | 4 | 3 | Fast, coarse cuts | |
| T118AHM1 | Special for Stainless Steel | 24 Teeth Per Inch | 3.25 | 1 | Straight cuts, long life | |
| T118AHM3 | Special for Stainless Steel | 24 Teeth Per Inch | 3.25 | 3 | Straight cuts, long life | |
| T118EHM1 | Special for Stainless Steel | 14 Teeth Per Inch | 3.25 | 1 | Straight cuts, long life | |
| T118EHM3 | Special for Stainless Steel | 14 Teeth Per Inch | 3.25 | 3 | Straight cuts, long life | |
| T130DG. | Diamond for Hard Tile | 30 Teeth Per Inch | 3.25 | 1 | Clean cuts | |
| T130RF1 | Special for Ceramics | 30 Grit Carbide for Special Materials | 3.25 | 1 | File effect for fine, straight or curved cuts | |
| T141HM1 | Special for Fiber and Plaster | 6 Teeth Per Inch | 4 | 1 | Fast, coarse cuts | |
| T150RF1 | Special for Ceramics | 50 Teeth Per Inch | 3.25 | 1 | File effect for fine, straight or curved cuts | |
| T150RF3 | Special for Ceramics | 50 Grit | 3.25 | 3 | File effect for fine, straight or curved cuts | |
| T301CHM1 | Special for Solid Surface | 8 Teeth Per Inch | 4.625 | 1 | Fast, clean cuts | |
| T301CHM3 | Special for Solid Surface | 8 Teeth Per Inch | 4.625 | 3 | Fast, clean cuts | |
| T313AW3 | Special for Soft Materials | Knife Edge | 6 | 3 | Fast, coarse cuts |
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)
Mon-Fri: 7:00-19:00 CST
Visit the Frequently Asked Questions section.
We may already have the answer for your questions.
