Contact Us
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)Mon-Fri: 7:00-19:00 CST
1/2 In. x 1 In. Solid Carbide 3-Flute Downcut Spiral Bit
Hover Image to Zoom
Hover Image to Zoom
85974M
Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Downcut spiral is used for downward chip flow and the best finish on the top side of the work piece. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut
Benefits
Ideal for penetrating hard-to-route materials under reduced spindle speeds or horsepower
Solid carbide for durability
Downcut holds the material and forces chips down during routing
Recommended for CNC or router table use
Balanced cutting with minimal vibration
Technical Data
| B. Cutting Edge Length | 1" |
| C. Shank Diameter | 1/2" |
| D. Overall Length | 3" |
| Description | 1/2 In. x 1 In. Solid Carbide 3-Flute Downcut Spiral Bit |
| Flute Length in | 1.0 |
| Number of Flutes | 3.0 |
| Overall Diameter in | 1/2" |
| Overall Length in | 3.0 |
| Pack Quantity | 70 |
