Contact Us
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)Mon-Fri: 7:00-19:00 CST
SDS-plus® Bulldog™ Anchor Drive Sleeve
.png)
.png)
Hover Image to Zoom
Hover Image to Zoom
AD2300
For use with masonry fastening systems/hex sleeve drive tools. Hex drive on bit fits into driver sleeve. 1/4 In. hex shoulder for drive sleeve used to set masonry screws.
Benefits
Anchor drive sleeve used to set masonry screws and concrete anchors
Bit/extension in excess of 8” should not exceed 600 RPM
Accepts 5/32 In. , 3/16 In. and 1/4 In. bits
Maintains tight grip for precise drilling
Technical Data
| *Note | Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM |
| Description | Anchor drive sleeve used to set masonry screws and concrete anchors. Accepts 5/32", 3/16" and 1/4" bits |
| Flute Length | 1.0 |
| Length | 1.0" |
| Quantity | 1 |
AD2300
Includes
-
AD2300
Includes
-
HC2309
Includes
Hex Drill Bits: (1) 5/32", (1) 3/16"; Phillips® Insert Bits: (1) #2, (1) #3; (1) 5-3/4" Sleeve, Sockets: (1) 1/4", (1) 5/16"
Other sizes
HC2309
Description
7 pc anchor drive installation kit: 5/32" x 6-1/2" and 3/16" x 6-1/2" hex bits, #2 and #3 Phillips® power bits, 5-3/4" sleeve, 1/4" and 5/16" sockets
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM