Have a tool, accessory, application or service question?
Call us at 1-877-BOSCH99 (1-877-267-2499) or visit the Frequently Asked Questions.
The HDC400 dust collection attachment provides a unique dust collection system for breaker hammers. The ski-boot clamping band makes installation on the tool a snap. The clamp housing allows the attachment to be installed on the tool so that the dust collection shroud can be positioned near the chisel tip for optimum dust extraction. The clamp housing also can be adjusted up or down on the tool to accommodate a small variety of chisel lengths. The system also allows the dust collection shroud to float up or down should it make contact with the work piece during use. The dust port fits Bosch 1-3/8 In. vacuum nozzles but can also fit 1-1/4 In. to 2 In. nozzles with the appropriate adapter.
|Dust collection attachment|
|Overall Length in||38.0|
|Works With||Compatible Hammers
11335K, BH2760VC, BH2770VCD, DH1020VC (When used with DH1020VC only for use when tool is pointing downward)
Anti-Static Vacuum Hoses
VH1635A (by means of anti-static adapter included with that hose), VAC008, and most other 35 mm anti-static hoses
Other Vacuum Hoses
VH1035 and VH1635 (by means of VX120 adapter included with those hoses), VAC005 and VAC006 hoses, and most other 35 mm hoses
Adapter for 1-1/4" and 1-1/2" Hoses
VAC002 or VAC024
Adapter for 2-1/2" Hoses
|Includes||Dust collection attachment|