1617EVS 2.25 HP Electronic Fixed-Base Router

1617EVS
2.25 HP Electronic Fixed-Base Router

1617EVS 1617EVS

Product Description

Description

The Bosch 1617EVS 2.25 HP Electronic Fixed-Base Router has the power to get results, with a 12 Amp motor and adjustable speed settings. The variable-speed dial allows the operator to set the optimal speed. Constant Response Circuitry, the router will maintain a constant speed throughout the cut, resulting in clean, accurate product. Users can glide along the intended cutline using dovetail fixtures, templates, jigs and other guidance devices. The Bosch Precision Centering Design allows the bit to be centered with the sub-base or optional template guides.

Includes

  • 1/4" S. R. Collet Chuck -- 2 610 906 283
  • 1/2" S. R. Collet Chuck -- 2 610 906 284
  • 16mm Shaft Wrench -- 2 610 991 388
  • Collet Nut Wrench -- 2 610 992 417
  • Chip Shield -- 2 610 991 389
  • Fixed Base (RA1161)
  • T-Handle Hex Height Adjustment Wrench - 2610923193
  • Pack of 3 10-24 Screws for Table Mounting - 2610925813
1617EVS 2.25 HP Electronic Fixed-Base Router

Technical Data

Specifications

Attributes
Amperage 12.0
Base Diameter 6"
Base Opening 3-3/4"
Case Type No Case Included
Collet Capacity 1/4", 3/8", 1/2", 8 mm
Dust Collection No
Fixed-Base Depth Range 1-5/8"
No Load RPM 8,000-25,000
Rating 120V AC
Subbase Opening 2"
Tool Level 2 - Corded – variable speed intermediate
Used on Model No. RA1171, RA1180, RA1181, RA1182, RA1200 Router Tables
Voltage 120V
Weight 8.3lb
Includes 1/4" S. R. Collet Chuck -- 2 610 906 283, 1/2" S. R. Collet Chuck -- 2 610 906 284, 16mm Shaft Wrench -- 2 610 991 388, Collet Nut Wrench -- 2 610 992 417, Chip Shield -- 2 610 991 389, Fixed Base (RA1161), T-Handle Hex Height Adjustment Wrench - 2610923193, Pack of 3 10-24 Screws for Table Mounting - 2610925813

Benefits

  • 12 Amp motor
  • Constant Response™ circuitry stabilizes start-up torque
  • Adjustable speed dial (8000-25,000 RPM)
  • Microfine bit-depth adjustment
  • Rounded hardwood handles maximize user control
  • Right or left switch location - for user preference and consistency (motor does not rotate during depth adjustment)
  • Threaded three-hole base pattern
  • Dust-sealed power switch
  • One-piece armature shaft
  • 2 In. sub-base opening
  • Fixed base has threaded holes for mounting to router table positioned in common 3-hole pattern
  • Double insulated
  • Power switch - now includes dust-sealed power switch
  • Now includes RA1161 fixed-base with system for adjusting bit height from above a router table
  • Optional RA1126 quick-change Templet guide adapter (sold separately) - for fast and easy change of Bosch RZ1-series Templet guide (or threaded Templet guides, if optional RA1100 adapter is also used)

Support