dcsimg

Power Tools for Professionals

1617EVS

bosch1617EVSwalkaround(2).png
1617EVS_BACK_35_400x300(2).jpg
1617_App_05(2).png
1617_App_03(2).png
1617_App_02(2).png
1617_App_01(2).png
boschcordedrouters1617evsc3_1000(2).png
2.25 HP Electronic Fixed-Base Router

The Bosch 1617EVS 2.25 HP Electronic Fixed-Base Router has the power to get results, with a 12 Amp motor and adjustable speed settings. The variable-speed dial allows the operator to set the optimal speed. Constant Response Circuitry, the router will maintain a constant speed throughout the cut, resulting in clean, accurate product. Users can glide along the intended cutline using dovetail fixtures, templates, jigs and other guidance devices. The Bosch Precision Centering Design allows the bit to be centered with the sub-base or optional template guides.

Read more Show less

Includes

  • 1/4" S. R. Collet Chuck -- 2 610 906 283
  • 1/2" S. R. Collet Chuck -- 2 610 906 284
  • 16mm Shaft Wrench -- 2 610 991 388
  • Collet Nut Wrench -- 2 610 992 417
  • Chip Shield -- 2 610 991 389
  • Fixed Base (RA1161)
  • T-Handle Hex Height Adjustment Wrench - 2610923193
  • Pack of 3 10-24 Screws for Table Mounting - 2610925813

Benefits

  • 12 Amp router motor - combines ample power with adjustable speed settings, allowing users to glide along cutlines
  • Constant Response circuitry stabilizes start-up torque
  • Adjustable speed dial (8000-25,000 RPM)
  • Microfine bit-depth adjustment
  • Rounded hardwood handles maximize user control
  • Right or left switch location - for user preference and consistency (motor does not rotate during depth adjustment)
  • Threaded three-hole base pattern
  • Dust-sealed power switch
  • One-piece armature shaft
  • 2 In. sub-base opening
  • Fixed base has threaded holes for mounting to router table positioned in common 3-hole pattern
  • Double insulated
  • Power switch - now includes dust-sealed power switch
  • Now includes RA1161 fixed-base with system for adjusting bit height from above a router table
  • Compatible with optional RA1129 Template Guide Adapter Set – for easy change of Bosch quick-release template guides and common threaded template guides; includes RA1126 Template Guide Adapter and RA1100 Interface for Threaded Template Guides

Technical Data

Specifications
Amperage 12.0
Base Diameter 6"
Base Opening 3-3/4"
Case Type No Case Included
Collet Capacity 1/4", 3/8", 1/2", 8 mm
Dust Collection No
Fixed-Base Depth Range 1-5/8"
Length 6.0"
No Load RPM 8,000-25,000
Rating 120V AC
Subbase Opening 2"
Voltage 120V
Weight 8.3lb
Width 10.0"
Works With Plunge Base
RA1166
Router Tables
RA1141 Portable Benchtop Router Table, RA1171 Cabinet-Style Router Table, RA1181 Router Table,
Undertable Router Base
RA1165
Offset Bit-Change Wrench Set for Easier Bit Change in Router Table
RA1052
Router Guide
RA1054
Template Guide System
RA1128 Template Guide Set, RA1129 Template Guide Adapter Set
Centering Device for Subbases and Attached Template Guides
RA1051
Dust Collection Attachments
RA1175 Edge-forming Dust Hood, RA1172AT Two-Hood Dust Hood Set, RA1173AT Three-Hood Dust Hood Set
Includes 1/4" S. R. Collet Chuck -- 2 610 906 283, 1/2" S. R. Collet Chuck -- 2 610 906 284, 16mm Shaft Wrench -- 2 610 991 388, Collet Nut Wrench -- 2 610 992 417, Chip Shield -- 2 610 991 389, Fixed Base (RA1161), T-Handle Hex Height Adjustment Wrench - 2610923193, Pack of 3 10-24 Screws for Table Mounting - 2610925813
Read more Show less

Owner's Manual

1617EVS

Accessories For 1617EVS

Arbors for Slotting Cutters
Bearing Enlarger Set
Bearing Enlargers
Bowl- and Sink-Trim Bits
Carbide-Tipped A-Line Edge Aligning Bits
Carbide-Tipped Beading Bits
Carbide-Tipped Beading Stile and Rail Bits
Carbide-Tipped Bevel-Bowl Bit
Carbide-Tipped Bullnose Bits
Carbide-Tipped Chair Mat Edge Bit
Carbide-Tipped Chamfer Bits
Carbide-Tipped Classical Bits
Carbide-Tipped Classical Groove Bits
Carbide-Tipped Convex Edging Bit
Carbide-Tipped Core Box Bits
Carbide-Tipped Cove Bits
Carbide-Tipped Cove Raised Panel Bit
Carbide-Tipped Cove Vertical Panel-Raiser Bit
Carbide-Tipped Cove and Bead Bits
Carbide-Tipped Dish Carving Bit
Carbide-Tipped Doorlip Bit
Carbide-Tipped Double-Flute Flush and Bevel Laminate Trim Assemblies
Carbide-Tipped Double-Flute Flush and Bevel Laminate Trim Bits
Carbide-Tipped Double-Flute Straight Bits
Carbide-Tipped Double-Flute Templet Trim Bit
Carbide-Tipped Dovetail Bits
Carbide-Tipped Drawer Lock Joint Bit
Carbide-Tipped Edge Beading Bits
Carbide-Tipped Extended Round Nose Bits
Carbide-Tipped Finger Pull Bit
Carbide-Tipped Flush Trim V-Groove Bits
Carbide-Tipped Four-Flute Flush and Bevel Laminate Trim Assemblies
Carbide-Tipped Helical Laminate Trim Bit
Carbide-Tipped Hinge Mortising Bits
Carbide-Tipped Lock Miter Bit
Carbide-Tipped Lock Mortising Bits
Carbide-Tipped Multi-Bead / Reed Bit
Carbide-Tipped Multi-Form Bit
Carbide-Tipped No-Drip Edge Bit
Carbide-Tipped Ogee Bits with Fillet
Carbide-Tipped Ogee Raised Panel Bits
Carbide-Tipped Ogee Stile and Rail Bits
Carbide-Tipped Ogee Vertical Raised Panel Bit
Carbide-Tipped Ogee and Bead Bit
Carbide-Tipped Overhang Cutoff Bits
Carbide-Tipped Plunge Roundover Bits
Carbide-Tipped Plywood Mortising Bits
Carbide-Tipped Rabbeting Bits
Carbide-Tipped Raised-Panel Groove Bit
Carbide-Tipped Reverse Curve Ogee and Bead Bit
Carbide-Tipped Reversible Glue-Joint Bit
Carbide-Tipped Roman Ogee Bits
Carbide-Tipped Roundover Bits
Carbide-Tipped Single-Flute Straight Bits
Carbide-Tipped Stair Routing Bit
Carbide-Tipped Table Edge Bit
Carbide-Tipped Tongue and Groove Bits
Carbide-Tipped Top Bearing Dado Clean Out Bit
Carbide-Tipped Top Bearing Straight Trim Bits
Carbide-Tipped Traditional Raised Panel Bits
Carbide-Tipped Traditional Vertical Raised Panel Bit
Carbide-Tipped Triple-Flute Flush Laminate Trim Bits
Carbide-Tipped Triple-Flute Flush and Bevel Laminate Trim Assemblies
Carbide-Tipped Triple-Flute Templet Trim Bit
Carbide-Tipped Under Round Bits
Carbide-Tipped V-Groove Bits
Carbide-Tipped Wavy Edge Bits
Carbide-Tipped Wedge Groove Bit
Carbide-Tipped Wedge Tongue Bit
Combination-Flush and Bevel-Trim Bits
High-Speed Steel Double-Flute Straight Bits
High-Speed Steel Single-Flute Straight Bits
Keyhole Router Bits
Non-Marring Bearing Set
Non-Marring Bearings
Pilot Panel Down Spiral Bits
Single Flute Pilot Panel Bits with Drill-Through Point
Solid Carbide Bevel-Trim Bits
Solid Carbide Double-Flute Acrylic Bit
Solid Carbide Double-Flute Chipbreaker Spiral Bits
Solid Carbide Double-Flute Compression Spiral Bit
Solid Carbide Double-Flute Downcut Spiral Bits
Solid Carbide Double-Flute O-Flute Bits
Solid Carbide Double-Flute Straight Bits
Solid Carbide Double-Flute Straight Bits
Solid Carbide Double-Flute Upcut Spiral Bits
Solid Carbide Fiberglass Bit/Burr Bit
Solid Carbide Flush-Trim Bits
Solid Carbide Hole and Flush Trim Bit
Solid Carbide Rip and Slotter Bit
Solid Carbide Single-Flute Compression Spiral Bit
Solid Carbide Single-Flute O-Flute Bits
Solid Carbide Single-Flute Straight Bits
Solid Carbide Triple-Flute Downcut Spiral Bit
Solid Carbide Triple-Flute Upcut Spiral Bit
Solid Carbide V-Groove Bit
Solid Carbide Veining Bits
Staggertooth Pilot Panel Bit
Staggertooth Router Bits
Three-Wing Slotting Cutters
Two Flutes Pilot Panel Bits with Drill-Through Point
Two-Wing Slotting Cutter

Support

Customer Support

Have a tool, accessory, application or service question?
Call us at 1-877-BOSCH99 (1-877-267-2499) or visit the Frequently Asked Questions.

Search for Parts Diagram

Locate and download the parts diagram for your tool.

Product Registration

Protecting your investment in Bosch power tools can save you time and money in the future.

Order Spare Parts

Order your genuine Bosch parts here.

Contact Us

Call our Service Hotline or use our contact form.

1-877-BOSCH99 (1-877-267-2499)

Mon-Fri: 7:00-19:00 CST

FAQ

Visit the Frequently Asked Questions section.
We may already have the answer for your questions.

Show FAQ
TEXT Customer Service

Have a service related question? Text us here.

Mon-Fri: 7:00-19:00 CST