Includes
- (1) HD18-2 Two-Speed Hammer Drill
- (1) 360° Auxiliary Handle
- (1) Depth Gauge
- (1) Chuck Key
HD18-2
(22).jpg)
(27).jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
(22).jpg)
(27).jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Two-Speed Hammer Drill
The Bosch HD18-2 Two-Speed Hammer Drill features a muscular 8.5 Amp motor that handles all masonry drilling applications, delivering a max of 51,000 BPM for muscle and durability. The tool's drilling capacities range from 3/4- In. for masonry applications to 1-1/2- In. for wood. The HD18-2 features a torque-control auxiliary handle, which locks into place; the handle has a built In. depth gauge. The dual-mode selector easily converts from rotation-only to hammer-drill mode. A rotating brush plate allows users to easily back out bound-up bits. It has two speed settings, one for high speed and one for high torque. Because of its heavy-duty three-jaw 1/2- In. chuck, the tool has a high clamping force that helps prevent drill bits from slipping. This robust drill has a metal front housing for longer life, a pistol-grip handle with soft-grip design and an integral slip clutch for security against recoil.
Benefits
- Powerful 8.5 Amp motor – for high-torque and high-speed drilling capabilities
- Auxiliary handle with built-in depth gauge – securely locks into place and provides consistent drilling depth
- Integral slip clutch – more user security because it disengages the output shaft should the bit get into a bind situation
- Securely clamping, 1/2-In. three-jaw chuck — for rugged hammer-drilling applications
- Dual-mode selector – easily converts from rotation-only to hammer-drill mode
- Rotating brush plate – delivers extended brush life and provides equal power in forward and reverse
- Pistol-grip handle – includes a compact ergonomic design with soft-grip
- Variable-speed reversing trigger — for accurate bit starting, as well as removing fasteners or bound bits
- Metal gear housing — for long life and rugged job site durability
- Two speeds – high speed for concrete, high torque for drilling in wood and metal
- Works with Bosch PRO+GUARD™ dust solutions – an end-to-end dust-collection system that helps users move toward OSHA Silica Table 1 dust compliance
Technical Data
| Specifications | |
|---|---|
| Amperage | 8.5 |
| Chuck Design | Keyed |
| Chuck Size | 1/2 in |
| Height | 8.5" |
| Length | 13.4" |
| Max. Capacity in Concrete | 3/4" |
| Max. Capacity in Wood | 1-1/2" |
| No Load BPM | 0-19,550 / 0-51,000 |
| No Load RPM | 0-1,200 / 0-3,200 |
| Rating | 120V AC |
| Voltage | 120V |
| Weight | 5.8lb |
| Width | 3.125" |
| Works With | Dust Extraction/Collection Hood HDC200 |
| Includes | (1) HD18-2 Two-Speed Hammer Drill, (1) 360° Auxiliary Handle, (1) Depth Gauge, (1) Chuck Key |
.png)
.png)
.png)
.png)
.png)
.png)
.png)