Contact Us
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)Mon-Fri: 7:00-19:00 CST
1/2 In. x 1-1/2 In. Carbide Tipped 2-Flute Template Trim Bit
Hover Image to Zoom
Hover Image to Zoom
85601M
Premium-quality Micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Double flute trim bit allows for a smoother finish. The fully hardened and tempered steel shank provides ultimate durability.
Benefits
Provides smooth cuts for laminate trimming, cutouts, and pattern cutting
Micrograin carbide tips for long life
Control cut design helps minimize kickback
Provided with two ball bearings to widen the bearing surface and reduce template wear
Technical Data
| *Note | Extra ball bearing 2610906500 |
| B. Cutting Edge Length | 1-1/2" |
| C. Shank Diameter | 1/2" |
| D. Overall Length | 4-1/4" |
| Description | 1/2" x 4-1/4" Carbide-Tipped 2-Flute Templet Trim Bit |
| E. Bearing Diameter | 1/2" |
| Flute Length in | 1.5 |
| Number of Flutes | 2.0 |
| Overall Diameter in | 1/2" |
| Overall Length in | 4.5 |
| Pack Quantity | 1 |
85601M
Includes
-
85601M
Includes
-
85601MC
Includes
(1) 1/2 In. x 1-1/2 In. Carbide-Tipped Double-Flute Template Trim Router Bit
Other sizes
85601MC
Overall Diameter in
1/2"
B. Cutting Edge Length
1-1/2"
C. Shank Diameter
1/2"
D. Overall Length
4-1/4"