Contact Us
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)Mon-Fri: 7:00-19:00 CST
85641M
.png)
.png)
3-3/8 In. x 1/2 In. Carbide Tipped Cove Raised Panel Bit
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. This bit is used for making an attractive cove design in raised panel doors and paneling. The fully hardened and tempered steel shank provides ultimate durability.
Technical Data
| Specification | |
|---|---|
| A. Overall Diameter | 3-3/8" |
| B. Cutting Edge Length | 1/2" |
| Bearing Diameter | 1/2" |
| C. Shank Diameter | 1/2" |
| Cutting Width | 1-7/16" |
| D. Overall Length | 2-7/8" |
| Description | 3-3/8 In. x 1/2 In. Carbide Tipped Cove Raised Panel Bit |
| E. Bearing Diameter | 1/2" |
| F. Radius | 1-9/16" |
| Number of Flutes | 2.0 |
| Overall Length | 2.375 |
Benefits
- Used to create clean, simple lines to accentuate a surface
- Control cut design helps minimize kickback
- Micrograin carbide tips provide superior wear resistance and long life
- 3/4 In, is the minimum recommended panel thickness
- Recommended for use with a router table
- Compact ball-bearing pilot guides bit along edge of material