Customer Support
Have a tool, accessory, application or service question?
Call us at 1-877-BOSCH99 (1-877-267-2499) or visit the Frequently Asked Questions.
TS1020
The Bosch TS1020 Dual-Activation Cartridge is exclusively designed for use with the Bosch GTS1041A REAXX10 In. jobsite table saw. The dual-activation cartridge is part of the saw's Active Response Technology, which imparts a low-voltage electrical signal onto the blade. The signal alters upon contact with user's skin, triggering a chemical reaction in an activation cylinder similar to the deployment of an air bag in an automobile. In this case, instead of deploying an airbag, the chemical reaction fires a piston that pushes against the drop arm. This action rapidly forces the saw blade down and away from the operator, mitigating serious user injury. Each cartridge allows for two activations before replacement is needed. Additional onboard cartridge storage is also located onboard the tool. After activation, the system can be reset in less than 60 seconds. Each of the dual-activation cartridges has been designed to have a 20-year shelf-life, and each has an expiration date printed on it. The dual-activation cartridge works with standard 10 In. fine finish and construction-grade blades and stacked dado blades.
Quantity | Include |
---|---|
1 | Dual-Activation Cartridge |
two single-shot cylinders for two separate activations with each cartridge
takes less than 60 seconds after blade drop, with no damage to the blade
works with nearly all standard 10 In. fine finish and construction-grade blades and stacked dado blades
shown to work in dusty, tough jobsite conditions
each of the dual-activation cartridges has an expiration date printed on the cartridge
Material | Metal |
Works With | Table Saw GTS1041A |
Includes | (1) Dual-Activation Cartridge |
Includes
(1) Dual-Activation Cartridge
Weight
-
Includes
(1) Dual-Activation Cartridge
Weight
-
Includes
GTA500 Table Saw Stand
Weight
14.0lb
Includes
(1) GTA570 Folding Table Saw Scissor Stand
Weight
13.0lb
Includes
(1) TS0800 Table Saw Zero-Clearance Insert
Weight
0.31lb
Includes
(1) TS0801 Table Saw Dado Insert
Weight
0.66lb
Includes
Dust bag and wire support frame
Weight
-
Includes
Zero-Clearance Insert, Mounting Hardware for preparation of insert
Weight
0.25lb
Includes
(1) Zero-Clearance Throatplate Insert for Use with Saw Blade or Dado Set, (1) Hardware Kit for Dado Cutting
Weight
1.5lb
Includes
(1) - Dado Washer
Weight
0.5lb
Includes
(1) Side Support
Weight
2.5lb
Includes
(1) TS1009 Molding Insert
Weight
0.5lb
Includes
Zero-Clearance Insert, Mounting Hardware for prepararion of insert
Weight
0.35lb
Includes
Dado Insert, Combination Washer
Weight
1.2lb
Includes
(1) Outfeed Support Assembly
Weight
9.0lb
Includes
No additional items are included
Weight
52.0lb
Includes
(1) VAC004
Weight
0.5lb