Contact Us
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)
Mon-Fri: 7:00-19:00 CST
Rubber Ring and Pin for SDS-max® Rotary Hammer Core Bit
(229).png)
.png)
.png)
.png)
(229).png)
.png)
.png)
.png)
Hover Image to Zoom
Hover Image to Zoom
HCRR001
Bosch SDS-max® carbide-tipped rotary hammer core bits offer an integral shank for better power transmission. Maximum core size is 2-5/8 In. .
Benefits
Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design
All-in-one core transmits power directly to the end of the bit
Carbide-tipped centering bit
Asymmetrical carbide teeth for faster cutting, longer life
Technical Data
| Description | Eye, ear and dust protection |
| Diameter inch | N/A |
| Length in | 0.0" |
| Useable Length in | N/A |
HCRR001
HCRR001
HC8501
HC8506
HC8510
HC8515
HC8516
HC8517
HC8521
HC8526
HC8531
HC8536
HC8540
HC8545
HC8550
HC8555
HC8570
HC8575
HC8595
Other sizes
HC8516
Diameter inch
2-1/4"
Useable Length in
7"
Overall Length in
12
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8517
Diameter inch
2-1/4"
Useable Length in
17"
Overall Length in
22
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8570
Diameter inch
5"
Useable Length in
7"
Overall Length in
12
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8531
Diameter inch
3-1/4"
Useable Length in
7"
Overall Length in
12
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8536
Diameter inch
3-1/4"
Useable Length in
17"
Overall Length in
22
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8540
Diameter inch
3-9/16"
Useable Length in
7"
Overall Length in
12
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8545
Diameter inch
3-9/16"
Useable Length in
17"
Overall Length in
22
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8550
Diameter inch
4"
Useable Length in
7"
Overall Length in
12
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8555
Diameter inch
4"
Useable Length in
17"
Overall Length in
22
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8575
Diameter inch
5"
Useable Length in
17"
Overall Length in
22
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8595
Diameter inch
6"
Useable Length in
17"
Overall Length in
22
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8521
Diameter inch
2-5/8"
Useable Length in
7"
Overall Length in
12
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8526
Diameter inch
2-5/8"
Useable Length in
17"
Overall Length in
22
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8501
Diameter inch
1-3/4"
Useable Length in
7"
Overall Length in
12
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8506
Diameter inch
1-3/4"
Useable Length in
17"
Overall Length in
22
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8510
Diameter inch
2"
Useable Length in
7"
Overall Length in
12
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM
HC8515
Diameter inch
2"
Useable Length in
17"
Overall Length in
22
*Note
Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM