.png)
.png)
.png)
.png)
Service Hotline
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)
Mon-Fri: 7:00-19:00 CST
1/4 In. x 1/4 In. Solid Carbide 1-Flute Hole and Flush Trim Bit
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
Hover Image to Zoom
Hover Image to Zoom
85287
Premium-quality Micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. The hole and flush bit is used where laminate is applied over precut openings in the substrate. The bit bores through the laminate and cuts the laminate out of the opening. Solid carbide gives best rigidity and long life.
Benefits
Drills through surface lamination into pre-cut openings and trims edges flush in one operation
Drill-through pilot for guiding on Templet or framing after plunging through material
Balanced cutting with minimal vibration
Solid carbide for durability
Technical Data
| A. Overall Diameter | 1/4" |
| B. Cutting Edge Length | 1/4" |
| C. Shank Diameter | 1/4" |
| D. Overall Length | 1-1/2" |
| Description | 1/4" x 1/4" Solid Carbide 1-Flute Hole and Flush Trim Bit |
| Flute Length | 0.25 |
| Number of Flutes | 2.0 |
| Overall Length | 1.5 |
