SDS-plus® Bulldog™ Anchor Drive Sleeve
AD2300
Description | Anchor drive sleeve used to set masonry screws and concrete anchors. Accepts 5/32", 3/16" and 1/4" bits |
*Note | Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM |
7 pc. SDS-plus® Bulldog™ Anchor Drive Installation Kit
HC2309
Description | 7 pc anchor drive installation kit: 5/32" x 6-1/2" and 3/16" x 6-1/2" hex bits, #2 and #3 Phillips® power bits, 5-3/4" sleeve, 1/4" and 5/16" sockets |
*Note | Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM |