.png)
.png)
.png)
.png)
Service Hotline
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)
Mon-Fri: 7:00-19:00 CST
1/2 In. x 2-1/8 In. High Speed Steel Pilot Panel Down Spiral Bit
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
Hover Image to Zoom
Hover Image to Zoom
85185
High speed steel bits can be easily sharpened to a very fine edge for smooth, precise cuts. HSS bits work best with softwoods/light plastics. Pilot panel bit has a drill-through point that plunges through the material, and is used for cutting aluminum sheets, insulation sheeting, wall panels, plywood, and other like materials.
Benefits
Down spiral pushes chips down while cutting to eliminate chip build-up and clogging
Eliminates vibration and extends bit life
For cutting aluminum sheets, wall panels, plywood, chip boards, insulation sheeting, and other synthetic boards
Drill-through pilot for guiding on templet or framing after panel has been mounted
Eliminates chipping and upward tearing of material
Technical Data
| A. Cut Diameter | 1/2" |
| B. Flute Length | 2-1/8" |
| C. Shank Diameter | 1/2" |
| D. Overall Length | 4-1/2" |
| Description | 1/2 In. x 2-1/8 In. High Speed Steel Pilot Panel Down Spiral Bit |
| Flute Length in | 2.125 |
| Number of Flutes | 2.0 |
| Overall Length in | 4.5 |
| Pack Quantity | 1 |
85185
85185
85183
85184
85187
Other sizes
85183
A. Cut Diameter
1/4"
B. Flute Length
5/8"
C. Shank Diameter
1/4"
D. Overall Length
2-3/4"
Pack Quantity
1
85184
A. Cut Diameter
3/8"
B. Flute Length
3/4"
C. Shank Diameter
3/8"
D. Overall Length
3-1/8"
Pack Quantity
1
85187
A. Cut Diameter
1/2"
B. Flute Length
1-1/4"
C. Shank Diameter
1/2"
D. Overall Length
3-13/16"
Pack Quantity
1