Table Saws

GTS1041A Professional

Table Saws

10 In. REAXX™ Jobsite Table Saw

  • Active Response Technology – mitigates injury to user in case of blade contact, dropping the blade under the table with no blade damage
  • Easy system reset – takes less than 60 seconds after blade drop, with no damage to the blade
  • Dual-activation cartridge – two single-shot cylinders for two separate activations with each cartridge
  • Smart Guard System – riving knife and anti-kickback pawls provide protection when a kickback occurs, while the overhead guard provides a barrier helping to deter blade contact
  • Powerful 15 Amp 4.0 HP Max motor – delivers 3,650 RPM and the power required for ripping in fine and rough carpentry materials, including standard 10 In. blade and dado applications
  • Enhanced SquareLock rip fence – engineered for enhanced clamping and trueness, with precision improvements for pre-squaring prior to locking
  • Large cast aluminum top – provides increased work space and material support with a 25 In. ripping capacity
  • Onboard system control – easy-to-understand saw status with intuitive LED lighted display
  • Phone app – communicates info from control system to NFC enabled phone, including number of system activations, servicing needs, access to instructions and other information
  • Onboard storage – access to all included parts, with additional cartridge storage, manual and system reset instructions
  • Constant Response circuitry – to maintain speed under load and overload protection
  • Soft-start circuitry – manages the intensity of motor start-up and minimizes the likelihood of tripping circuit breaker
  • Arbor lock – allows for easy blade changes with arbor lock and blade wrench located onboard
  • Easy blade adjustment – located on top of table near throat plate, direct accessibility for easy blade parallel adjustment
  • Convenient toolless throat plate lock – locks throat plate quickly and makes removal and reinstallation easy
  • T-slot miter gauge combined with T-slot rail – allows for better control and support during miter gauge applications
  • Durable sub base – increases tool life by handling tough jobsite conditions
  • Portability – works seamlessly with optional TS2100 Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down

GTS1041A Professional

GTS1041A Professional

Your Selection

 GTS1041A REAXX™ Jobsite Table Saw_GTS1041A_03_hero

Order number: 0601B13511

Technical data

The most important data

Amperage 15
Arbor in 5/8"-11
Bevel Angle Range -2° to 47°
Blade Diameter (in) 10
Dimensions 15.5 X 26 X 29.675
Dust Blower No
Height in 15.5 "
Length in 26 "
Max. Bevel Capacity (°) 47
Max. Depth of Cut at 45 Deg. 2-1/4"
Max. Depth of Cut at 90 Deg. 3-1/8"
No Load RPM 3,650
Rip Capacity - Left (in) 9
Rip Capacity - Right (in) 25
Voltage 110V - 120V
Weight 74 lb
Width in 29.675 "
Includes 10 In. 40-Tooth Saw Blade
(1) Dual-Activation Cartridge
(1) Miter Gauge
(1) SquareLock Rip Fence
(1) Barrier-Guard Device
(1) Anti-Kickback Pawls
(1) Push Stick
(1) Dual-Activation Cartridge Wrench
(1) Blade Wrench
(1) Hex Wrench
(1) Throat Plate Kit

GTS1041A Professional: Further information

Product Highlights

The Bosch GTS1041A REAXX10 In. jobsite table saw builds on Bosch's heritage of award-winning table saw design, offering the injury-mitigation Active Response Technology platform, which delivers a rapid drop of the saw blade below the tabletop when it detects human flesh coming in contact with the blade. This high-speed action helps to mitigate the potential of serious user injury. It does so without damaging the blade, and after activation, the system can be reset in less than 60 seconds. This technology reinforces the Smart Guard System, a modular blade guard that includes an adjustable riving knife, antikickback pawls and a barrier guard. The table saw features an enhanced SquareLock rip fence engineered for exact clamping and a more substantial feel similar to a cabinet-saw-grade glide. It also has spring-loaded pre-squaring that aligns the rip fence to the blade before locking, for enhanced cutting trueness. The saw's onboard control panel is an easy-to-understand LED light display that integrates Near Field Communication (NFC) technology. This allows NFC-enabled phones to communicate information from the onboard control system – such as system activations, servicing needs and instructions. This saw features a 15 Amp, 4.0-hp max motor producing 3,650 RPM. It includes advanced electronics that provide soft-start to manage motor start-up and Constant Response circuitry to maintain speed under load. The saw works with nearly all standard 10 In. fine finish and construction-grade blades and with 6 In. or 8 In. stacked dado blades, it has a 25 In. rip fence capacity, and it has onboard storage for all necessary parts, instructions and wrenches. It works seamlessly with the optional Gravity-Rise Wheeled Table Saw Stand, which was designed to handle tough terrain for trouble-free transport between jobsites, and to provide easy setup and fast take down.

Join our email list

Subscribe now for new product updates and more.

Subscribe