Service Hotline
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)
Mon-Fri: 7:00-19:00 CST
3-3/8 In. x 1/2 In. Carbide Tipped Traditional Raised Panel Bit
.png)
.png)
Hover Image to Zoom
Hover Image to Zoom
85639M
Premium-quality Micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. This bit is used for making an attractive traditional design in raised panel doors and paneling. The fully hardened and tempered steel shank provides ultimate durability.
Benefits
Used to produce raised panel cuts along straight and curved panel edges
Control cut design helps minimize kickback
Micrograin carbide tips provide superior wear resistance and long life
3/4 In. is the minimum recommended panel thickness
For use with a router table only
Compact ball-bearing pilot guides bit along edge of material
Technical Data
| *Note | Not for use with hand-held routers. Use with a router table only. Minimum recommended panel thickness is 3/4". |
| A. Overall Diameter | 3-3/8" |
| B. Cutting Edge Length | 1/2" |
| Bearing Diameter | 1/2" |
| C. Shank Diameter | 1/2" |
| Cutting Width | 1-7/16" |
| D. Overall Length | 2-13/16" |
| Description | 3-3/8 In. x 1/2 In. Carbide Tipped Traditional Raised Panel Bit |
| E. Bearing Diameter | 1/2" |
| F. Angle | 15° |
| Number of Flutes | 1.0 |
| Overall Length | 2.375 |
85639M
85639M
85583M
85637M
Other sizes
85583M
A. Overall Diameter
1-5/8"
B. Cutting Edge Length
1/2"
C. Shank Diameter
1/2"
D. Overall Length
2-3/8"
E. Bearing Diameter
1/2"
85637M
A. Overall Diameter
2-3/4"
B. Cutting Edge Length
11/16"
C. Shank Diameter
1/2"
D. Overall Length
2-17/32"
E. Bearing Diameter
1/2"