Service Hotline
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)
Mon-Fri: 7:00-19:00 CST
2-1/2 In. x 5/8 In. Carbide Tipped Ogee Raised Panel Bit
.png)
.png)
Hover Image to Zoom
Hover Image to Zoom
85638M
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. This bit is used for making an attractive ogee design in raised panel doors and paneling. The fully hardened and tempered steel shank provides ultimate durability.
Benefits
Bit cuts straight or curved panel inserts for raised panel doors used with 85625MC to cut matching stiles and rails
For use with a router table only
Control cut design helps minimize kickback
Compact ball-bearing pilot guides bit along edge of material
Micrograin carbide tips provide superior wear resistance and long life
Technical Data
| *Note | Not for use with hand-held routers. Use with a router table only. Minimum recommended panel thickness is 3/4". |
| B. Cutting Edge Length | 5/8" |
| Bearing Diameter | 1/2" |
| C. Shank Diameter | 1/2" |
| Cutting Width | 1-1/16" |
| D. Overall Length | 2-1/2" |
| Description | 2-1/2 In. x 5/8 In. Carbide Tipped Ogee Raised Panel Bit |
| E. Bearing Diameter | 1/2" |
| F. Radius | 3/4" |
| Number of Flutes | 1.0 |
| Overall Diameter in | 2-5/8" |
| Overall Length in | 2.5 |
| Pack Quantity | 1 |
85638M
85638M
85640M
Other sizes
85640M
Overall Diameter in
3-3/8"
B. Cutting Edge Length
9/16"
C. Shank Diameter
1/2"
D. Overall Length
2-29/32"
E. Bearing Diameter
1/2"