.png)
.png)
.png)
.png)
Service Hotline
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)
Mon-Fri: 7:00-19:00 CST
7/8 In. x 5/16 In. Carbide Tipped 4-Flute Flush Trim Replacement Cutter Bit
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
Hover Image to Zoom
Hover Image to Zoom
85417M
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Bevel trim bits are used to create a bevel on the trim edge of the laminate surface. Four flute design provides an ultra-smooth finish. The fully hardened and tempered steel shank provides ultimate durability.
Benefits
Replacement Cutters for 85414M and 85416M
Micrograin carbide tips provide superior wear resistance and long life
Four-flute design provides ultra-smooth finish with slightly reduced feed rate
For trimming laminates and similar materials
Technical Data
| *Note | Replacement cutter |
| A. Overall Diameter | 7/8" |
| Angle | Flush |
| B. Cutting Edge Length | 5/16" |
| C. Shank Diameter | 5/16" |
| D. Overall Length | - |
| Description | 7/8 In. x 5/16 In. Carbide Tipped 4-Flute Flush Trim Replacement Cutter Bit |
| E. Bearing Diameter | - |
| Flute Length | 0.3125 |
| Number of Flutes | 4.0 |
| Overall Length | 0.3125 |
85417M
85417M
85414M
85415M
Other sizes
85414M
A. Overall Diameter
7/8"
B. Cutting Edge Length
5/16"
C. Shank Diameter
1/4"
D. Overall Length
2-1/4"
E. Bearing Diameter
7/8"
85415M
A. Overall Diameter
1"
B. Cutting Edge Length
5/16"
C. Shank Diameter
1/4"
D. Overall Length
2-1/4"
E. Bearing Diameter
7/8"