.png)
.png)
.png)
.png)
Service Hotline
Call our Service Hotline or use our contact form.
1-877-BOSCH99 (1-877-267-2499)
Mon-Fri: 7:00-19:00 CST
15° x 5/16 In. Carbide Tipped 4-Flute Bevel Trim Assembly Bit
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
Hover Image to Zoom
Hover Image to Zoom
85415M
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Bevel trim bits are used to create a bevel on the trim edge of the laminate surface. Four flute design provides an ultra-smooth finish. The fully hardened and tempered steel shank provides ultimate durability.
Benefits
Four-flute design provides ultra-smooth finish with slightly reduced feed rate
Shielded, compact ball-bearing pilot guides bit along edge of material
Micrograin carbide tips provide superior wear resistance and long life
Individual components are replaceable
For trimming laminates and similar materials
Technical Data
| Angle | 15° |
| B. Cutting Edge Length | 5/16" |
| C. Shank Diameter | 1/4" |
| D. Overall Length | 2-1/4" |
| Description | 15° x 5/16 In. Carbide Tipped 4-Flute Bevel Trim Assembly Bit |
| E. Bearing Diameter | 7/8" |
| Flute Length in | 0.3125 |
| Number of Flutes | 4.0 |
| Overall Diameter in | 1" |
| Overall Length in | 2.25 |
| Pack Quantity | 1 |
85415M
85415M
85414M
85417M
Other sizes
85417M
Overall Diameter in
7/8"
B. Cutting Edge Length
5/16"
C. Shank Diameter
5/16"
D. Overall Length
-
E. Bearing Diameter
-
85414M
Overall Diameter in
7/8"
B. Cutting Edge Length
5/16"
C. Shank Diameter
1/4"
D. Overall Length
2-1/4"
E. Bearing Diameter
7/8"