The TC10 is equipped with expanded rear and side extension water trays to prevent over-spray and optimize water retention; while a rear over-spray deflector helps reduce upward over-spray and keeps water within the tool. The tool’s integrated and removable main water tray is designed with a drain plug and designated pump retainer, which quickly slides out to drain water or clean. The saw’s large, sliding, rubberized table work surface provides better work piece balance and control, especially when working with large dimension tile. The TC10 has a 24 In. rip and 18 In. diagonal cut capacity, and can power through materials including porcelain, marble, granite, slate and travertine tile thanks to a 1.5 HP and 4200 RPM motor. Using a quick-adjust edge guide or bevel adjustment, the tool can be easily positioned to pre-set 22.5-degree and 45-degree stops for repetitive and straight or angle cuts. A must-have for general contractors, remodeler and light-commercial users looking for better cuts and less mess.
|No Load RPM||4,200|
|Depth of Cut||3-3/4"|
|Includes||TC10 Tile Saw, Edge Guide, Auxiliary Table, Rear Water Extension Tray, Side Water Extension Tray, Water Pump, Blade Wrench, Hex Wrench|
Have a tool, accessory, application or service question?
Call us at 1-877-BOSCH99 (1-877-267-2499) or visit the Frequently Asked Questions.