CM10GD 10 In. Dual-Bevel Glide™ Miter Saw

CM10GD
10 In. Dual-Bevel Glide™ Miter Saw

CM10GD

Product Description

Description

The Bosch CM10GD is a 10 In. Dual-Bevel Glide™ miter saw that delivers accuracy and cutting control at all angles, as well as consistent precision throughout the life of the tool. The innovative Axial-Glide™ System provides wider cross-cuts, enhanced alignment and smoother glide, and the compact design takes up to 10 inches less workspace. With 4,800 no load RPM, there is plenty of power. Adjustable miter and bevel detents enable users to make precise common miter and bevel cuts, and the override allows for easy angle adjustment. The bevel lock lever and range selector are located safely upfront so users don't have to reach around behind the saw.

Includes

  • (1) 10” 60T Blade
  • (1) Material Clamp
  • (1) Dust Bag
CM10GD 10 In. Dual-Bevel Glide™ Miter Saw

Technical Data

Specifications

Attributes
Amperage 15.0
Dust Collection Yes
Weight 64.0lb
No Load RPM 4,800
Miter Angle Range 52° Left, 60° Right
Miter Positive Stops 0°, 15°, 22.5,° 31.6°, 45° (Left/Right)
Miter Detents 0°, 15°, 22.5°, 31.6°, 45° (Left/Right)
Voltage 120V
Length 32.0"
Blade Diameter 10.0
Bevel Stops 0°, 33.9°, 45° left and right
Bevel Angle Range 47° left and 47° right
Width 26.5"
Includes (1) 10” 60T Blade, (1) Material Clamp, (1) Dust Bag

Benefits

  • The Axial-Glide™ System uses the articulated arm flush with the back of the saw for durable precision and up to 10 In. less workspace
  • 4,800 no load RPM with 12 In. horizontal cut capacity (nominal), 5-1/2 In. vertical cut capacity against the fence (base), and a 6 In. crown cut capacity against the fence (45° spring)
  • Bevel lock lever and range selector located upfront for quick, easy settings without reaching around behind saw
  • Tall 4-1/4 In. sliding fences for easy bevel set-ups
  • Tall sliding 4-1/4 in. fences: for easy bevel set ups and increased crown and base molding capacity
  • Large easy-to-read uniform bevel & stainless steel miter scales: 52° left/60° right miter capacity; 47° left/47° right bevel capacity with marked detents and roof pitch angles
  • Adjustable miter detents: detents at 0°, 15°, 31.6°, 22.5°, 45°, 60° right super-accurate and durable design
  • Push-button miter Detent override - easy-to-access thumb actuated control right up front for fine miter angle adjustment
  • Bevel detents: 0, 33.9°, 45° left/right for accurate cuts
  • Category best 90% dust collection - optimized for cutting 2x material with a vacuum
  • Ergonomic ambidextrous trigger handle with soft grip - large form fitting ergonomic handle provides comfort for all-day use

Support