dcsimg

Router Attachments, Palm Routers

17 mm Collet Wrench

Comfortable drop-forged design
Thin profile for use on PR004 offset base collet, as well as PR10E and PR20EVS collets
Compare
10 mm Router Shaft Wrench

Comfortable drop-forged design
Thin profile for use on PR10E and PR20EVS armature shafts
Compare
Self-Releasing 1/4" Collet for Bosch Palm Routers

Self-Releasing Design
Compare
Fixed Base for Palm Router

For use with Bosch PR10E and PR20EVS Colt Palm Router Motors
Quick-Clamp System — Allows motor to be easily adjusted or moved from base to base
Enhanced Bit Capacity — Fixed Base accepts bits up to 1-5/16" in diameter
Compare
Straight Edge Guide for Palm Router

For use with Bosch PR011 Colt Palm Router Fixed Base
Guides router along edges of workpiece
Will also guide bit up to 3-5/8 In. in from the edge of workpiece
Compare
Roller Guide for Palm Router

Guides router when non-bearing bit or unpiloted bit is used
For use with Bosch models PR10E and PR20EVS
Adjustable vertically and horizontally
Compare
Offset Base with Roller Guide for Palm Router

For use with Bosch PR10E and PR20EVS Colt Palm Routers
The offset base's belt-driven offset spindle allows routing near vertical surfaces, such as when trimming laminate applied to top of installed countertop backsplash
The quick-clamp system allows the motor to be easily moved from base to base
Compare
Tilt Base for Palm Router

For use with Bosch PR10E and PR20EVS Colt Palm Router Motors
This tilt base has detents at key angles and allows routing in hard-to-reach areas, such as edge of countertop laminate near backsplash and also routing at special angles
The tilt angle adjustment range is 70°, from -30° to 45°
Compare
Palm Router Underscribe Attachment

For use with Bosch Colt Palm Router PR001 Fixed Base or PR011 Plunge Base
Underscribe Attachment — Mounts to bottom of subbase for creating precise seams between sheets of laminates
Easy front-to-back adjustment
Compare
Side-Handle Subbase with Dust Extraction Port

For use with Bosch PR001 Fixed Base of PR10E and PR20EVS Colt Palm Routers
Side handle provides additional gripping location for support of router
Allows dust collection when edge-forming or when working in from workpiece edge
Compare
Base Cover for Palm Router

This plastic cover fits on the Bosch PR001 Fixed Base for PR10E and PR20EVS Palm Routers
Provides a layer of insulation from heat, which can be generated by palm routers that are used in production shops and other applications that involved constant or heavy applications
Made of plastic
Compare
Palm Router Subbase for use with Bosch RA-Series Templet Guides

For use with Bosch PR001 Fixed Base for PR10E and PR20EVS Colt Palm Routers
Accepts Bosch RA-Series templet guides (not included)
Precision Centering Design — Makes it easy to follow intended cut line when using jigs, templets, dovetail fixtures and similar guidance devices
Compare
Palm Router Subbase for use with Threaded Templet Guides

For use with the PR011 Fixed Base of Bosch PR10E and PR20EVS Colt Palm Routers
Accepts common threaded templet guides (not included)
The Precision Centering Design allows accurate positioning of bit within the subbase and templet guides (not included)
Compare
Dust Extraction Hood Kit

For use with PR011 palm router plunge base
Makes it much easier to keep work area clean
Attaches with hose port facing front or back of base
Compare
Deluxe Router Guide

Precision fine adjustment control
Guides cut along the workpiece or up to 8" in from edge
Easily converts into circle guide for making arcs and circles up to 32" in diameter
Compare
Centering pin and cone

For precision centering of router sub bases or templet guides
For use with Bosch RA1161, RA1162, RA1166, 1617 Series, 1618 Series, 1619EVS, MRF01, MRP01, MRC23EVSK, MRP23EVS, MRF23EVS
Works with a 1/4" or 1/2" collet
Compare
Templet Guide Adapter

Required for mounting RA-series templet guides to Bosch routers
Lever action for fast and easy guide changes
Sold individually
Compare
Plunge Base for Palm Router

Compatible with Bosch PR20EVS and PR10E Colt™ Palm Router Motors
Smooth plunge action
The plunge lock release lever is conveniently located to allow maximum control, springs to locked position for use of use
Compare
7/16" OD Bosch Router Templet Guide

Outer diameter is 7/16 inch
Inner diameter is 3/8 inch
Protrusion below subbase is approximately 9/64 inch
Compare
7/16" OD Bosch Templet Guide

Outer diameter is 7/16 inch
Inner diameter is 3/8 inch
Protrusion below subbase is approximately 5/16 inch
Compare
1/2" OD Bosch Router Templet Guide

Outer Diameter = 1/2"
Inner Diameter= 13/32"
Protrusion Below Subbase = Approximately 7/16"
Compare
5/8" OD Bosch Router Templet Guide

Outer diameter is 5/8 inch
Inner diameter is 17/32 inch
Protrusion below subbase is approximately 3/16 inch
Compare
5/8" OD Bosch Router Templet Guide

Outer Diameter = 5/8"
Inner Diameter = 17/32"
Protrusion Below Subbase = Approximately 1/2"
Compare
3/4" OD Bosch Router Templet Guide

Outer Diameter = 3/4"
Inner Diameter = 21/32"
Protrusion Below Subbase = Approximately 3/16"
Compare
13/16" OD Bosch Rtr. Templet Guide

Outer Diameter = 13/16"
Inner Diameter = 5/8"
Protrusion Below Subbase = Approximately 31/64"
Compare
1-3/8" OD Bosch Rtr. Templet Guide

Outer diameter is 1-3/8 inch
Inner diameter is 1-19/64 inch
Protrusion below subbase is approximately 7/16 inch
Compare
Subbase

For use with PR001 Palm Router Fixed Base
Made of phenolic
Motor and fixed base shown in photo above are NOT included
Compare
Subbase

For use with PR011 Palm Router Plunge Base
Made of clear polycarbonate material
Motor and plunge base shown in photo above are NOT included
Compare